Ubiquiti Bullet M2-HP IEEE 802.11n 100 Mbps Wireless Bridge


  • No radio card / host board issues
  • No RF cable quality concerns
  • No mechanical stability concerns
  • No enclosure mounting requirements

33,000.00

Compare

Technical Data:

Manufacturer / Product: Ubiquiti Networks / Bullet M2 High Power
Processor Specs: Atheros MIPS 24KC, 400MHz
Memory Information: 32MB SDRAM, 8MB Flash
Operating System: AirOS
Networking Interface: 1 x 10/100 BASE-TX (Cat. 5, RJ-45)
Frequency Band: 2.4 GHz (Standard)
Supported WLAN Standards: IEEE 802.11b: 11 Mbps
IEEE 802.11g: 54Mbps
IEEE 802.11n: 150Mbps
Network modes: Access point, Access Point WDS, Station, Station WDS, Bride Mode, Router Mode
TX Power: 28dBm>
RX Sensitivity: -min. -97dBm
TCP/IP Throughput: 100Mbps+
Antenna Connector: N-male plug (connects directly to antenna)
max. Power Consumption: 7 Watt
Power Method: Passive Power over Ethernet
PoE Injector is not included!
Power Input: 12V – 24V
Appliance: In- and Outdoor
Dimensions: 15.2cm x 3.1cm x 3.7cm
Weight: 0.18 kg
Operating Temperature: -40°C to +80°C
Operating Humidity: 5 to 95% non condensing
    1. Processor Specs: Atheros SOC, MIPS 24 KC, 400MHz
    1. Memory Information: 32MB SDRAM, 8MB Flash
    1. Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
    1. Approvals: FCC Part 15.247, IC RS210, CE
    1. RoHS Compliance: YES
    1. RF Connector: Integrated N-type Male Jack (connects directly to antenna)
      1. Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)
  • No radio card / host board issues
  • No RF cable quality concerns
  • No mechanical stability concerns
  • No enclosure mounting requirements
Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ubiquiti Bullet M2-HP IEEE 802.11n 100 Mbps Wireless Bridge”

There are no reviews yet.

WhatsApp chat